基于安全围壁的浮动堆旁路泄漏设计研究

基于陆上核电厂二次安全壳的概念，引入了浮动堆安全围壁的构想，提出了“安全壳+安全壳围壁+堆舱”的放射性包容模式。研究了评价安全围壁的旁路泄漏设计思路，提出识别旁路泄漏途径和确定旁路泄漏率的方法。给出了安全围壁负压的设计依据，为后期浮动堆通风系统的设计提供参考。      

发夹式换热器管束流致振动数值模拟研究

运用计算流体力学方法,采用ANSYS CFX软件对发夹式换热器的壳侧流场进行了三维数值模拟。流场计算中采用多孔介质模型对管束区域进行简化,分析了壳侧流场的速度分布,结果表明:直管段部分的流体湍流强度大于弯管段,且外层管束所在区域为高流速区,受流体冲刷严重。结合流场信息,通过功率谱生成随机激振力,采用ABAQUS软件模拟计算了湍流激振下管束的振动响应,结果显示管束的面外均方根位移远大于面内位移,且弯管部分的振动位移最大。该研究结果可为发夹式换热器的性能分析和优化设计提供参考和依据。     

Copper-doped flower-like molybdenum disulfide/bismuth sulfide photocatalysts for enhanced solar water splitting

A facile synthesis approach to fabricate Cu-doped MoS₂/Bi₂S₃ (Cu-MoS₂/Bi₂S₃) photocatalysts is reported. The photocatalyst samples with varying amounts of Cu are applied in the photocatalytic splitting of water to produce H₂ under the irradiation of simulated solar light. The Cu-MoS₂/Bi₂S₃ photocatalysts with an optimum Cu loading of 20 mol% exhibited high photocatalytic performance, achieving a total H₂ yield of 32.4 μmol/h after 6 h of reaction. The photoactivity of the Cu-doped sample was shown to have risen more than 40% than that of pure MoS₂/Bi₂S₃. The improved performance is attributed to the impurity states generated within Cu-doped MoS₂, which serve as trapping sites for photogenerated electrons. The effective charge transfer mechanism achieved was evidenced by photoelectrochemical measurements. Based on the experimental results obtained, a plausible mechanism for the photocatalytic process associated with Cu-MoS₂/Bi₂S₃ was proposed.     

A Flexi-PEGDA Upconversion Implant for Wireless Brain Photodynamic Therapy

Near-infrared (NIR) activatable upconversion nanoparticles (UCNPs) enable wireless-based phototherapies by converting deep-tissue-penetrating NIR to visible light. UCNPs are therefore ideal as wireless transducers for photodynamic therapy (PDT) of deep-sited tumors. However, the retention of unsequestered UCNPs in tissue with minimal options for removal limits their clinical translation. To address this shortcoming, biocompatible UCNPs implants are developed to deliver upconversion photonic properties in a flexible, optical guide design. To enhance its translatability, the UCNPs implant is constructed with an FDA-approved poly(ethylene glycol) diacrylate (PEGDA) core clad with fluorinated ethylene propylene (FEP). The emission spectrum of the UCNPs implant can be tuned to overlap with the absorption spectra of the clinically relevant photosensitizer, 5-aminolevulinic acid (5-ALA). The UCNPs implant can wirelessly transmit upconverted visible light till 8 cm in length and in a bendable manner even when implanted underneath the skin or scalp. With this system, it is demonstrated that NIR-based chronic PDT is achievable in an untethered and noninvasive manner in a mouse xenograft glioblastoma multiforme (GBM) model. It is postulated that such encapsulated UCNPs implants represent a translational shift for wireless deep-tissue phototherapy by enabling sequestration of UCNPs without compromising wireless deep-tissue light delivery.     

Fabrication of direct Z-scheme FeIn2S4/Bi2WO6 hierarchical heterostructures with enhanced photocatalytic activity for tetracycline hydrochloride photodagradation

A series of direct Z-scheme FeIn₂S₄/Bi₂WO₆ hierarchical heterostructures with intimate interface contacts were synthesized by in-situ growth route and characterized by systematical analyses. All as-prepared FeIn₂S₄/Bi₂WO₆ nanocomposites showed significantly enhanced photocatalytic activity towards photodegradation for the removal of tetracycline hydrochloride (TCH) in comparison with individual FeIn₂S₄ and Bi₂WO₆. Meanwhile, the highest photocatalytic degradation activity can be achieved by modulating adding amount of FeIn₂S₄ in FeIn₂S₄/Bi₂WO₆ nanocomposites and the optimized component ratio of FeIn₂S₄ to Bi₂WO₆ is determined to be 10 wt%. The enhanced photocatalytic activity could be ascribed to efficient separation between photogenerated holes and electrons based on the construction of direct Z-scheme system. The high photocatalytic stability of resultant 10 wt% FeIn₂S₄/Bi₂WO₆ nanocomposites was revealed through six successive recycling reactions. The main intermediate generated during TCH photodegradation was explored by HPLC-MS. Besides, the direct Z-scheme photocatalytic mechanism was confirmed by band position analysis, electron spin resonance (ESR) and active species capture experiment.     

Preparation of iron and nitrogen co-doped carbon material Fe/N-CCM-T for oxygen reduction reaction

In this paper, iron and nitrogen co-doped carbon material with nanotube structure (Fe/N-C_CM-T) was synthesized by pyrolyzing a mixture of Fe salt, chitosan and melamine and displayed high electrocatalytic performance for oxygen reduction reaction (ORR). The structure of the Fe/N-C_CM-T was characterized and their ORR performance in alkaline media was investigated by linear sweep voltammetry, cyclic voltammetry and chronoamperometry. Fe/N-C_CM-T displayed better ORR performance than other carbon materials like Fe/N-C_C-800. The Fe/N-C_CM-800 with a large surface area (302.5 m²/g) especially exhibited the best ORR electrocatalytic performance among the prepared carbon materials, which was also proved by its similar Tafel slope (76 mV decade^?1) to Pt/C catalyst (74 mV decade^?1). Fe/N-C_CM-800 showed similar ORR activity as commercial Pt/C catalyst, but superior tolerance to methanol and stability. Such high ORR performance of the Fe/N-C_CM-T can be attributed to its nanotube structure, high specific surface area (SSA), high graphitic-N and pyridinic-N contents.     

Accelerate the alkaline hydrogen evolution reaction of the heterostructural Ni2P@Ni(OH)2/NF by dispersing a trifle of Ru on the surface

Electrocatalytic water splitting for hydrogen production plays a vital role in the development of new energy field, but there is still a lack of low-content precious metal or cost-effective non-noble metal catalysts for the hydrogen evolution reaction (HER). Therefore, how to develop the catalysts with a smaller amount of precious metal to achieve higher performance is still a major challenge. Herein, we have fabricated Ru–Ni₂P@Ni(OH)₂/NF-2 heterostructure by phosphating Ni(OH)₂/NF and then anchoring Ru on the surface through wet chemical strategy. Benefiting from its optimal ΔG_H1 and synergistic effect, this Ru–Ni₂P@Ni(OH)₂/NF-2 catalyst shows superior electrocatalytic HER kinetics in alkaline electrolyte. A small overpotential of 31 mV is needed for this electrocatalyst to obtain the current densities of 10 mA cm^?2 with remarkable durability over 24 h. This work provides a new strategy for the preparation of effective HER electrocatalyst with a low precious metal content.     

一种牵引供电系统地震灾害风险评估方法

电气化铁路牵引供电系统的安全可靠至关重要,然而部分地区牵引供电系统面临地震灾害威胁.为有效评估地震灾害下牵引供电系统的风险水平,该文首先采用蒙特卡洛方法模拟地震灾害并得到表征地震动强度的峰值加速度指标;然后通过分析系统主接线,建立系统的有向图逻辑模型,在此基础上,考虑系统停运概率、关键设备损失以及停运时间等因素定义风险指标,提出牵引供电系统地震灾害风险评估方法;最后选取西南地区某规划中的电气化铁路牵引供电系统作为算例,评估系统在地震灾害下的风险.结果表明,该文算法能有效量化牵引供电系统在地震灾害下的风险水平,可实现震后快速损失评估,为灾后抢险、应急物资调配提供参考,也可为牵引供电系统抗震规划提供理论依据.